Product Finder

With the help of our product finder you can find the right tool for your application. Refine your search by applying filters in the fields below.

 

 

 

Metal detector for installation in pipeline systems, e.g. for free-fall applications, pneumatic conveyor lines, material columns that are slowly moving down, or pump feed lines. The metal detector is used for the inspection of bulk materials, fibres, or liquid/pasty products.
Show more

The EXTRACTOR-SE inline magnet was developed specifically for applications in the plastics industry. It is designed for inspecting different granulates up to a grain size of 8-10 mm at a temperature of up to 80° C in slow-moving material columns.
Show more

GMT
Permanent-magnetic grid magnets of type GMT & GML predominantly are used in the plastics industry for the separation of coarse ferrous contaminants. Ferrous particles are filtered out of the bulk material while the rest of the material passes the magnet grid. It is recommended to regularly check the magnet to make sure that contaminants are not knocked off. The low purchase costs provide excellent benefit that often results in a considerably improved product quality and in a reduction of expensive repairs.
Show more

The SAFEMAG inline magnet was developed specifically for applications in the plastics industry. It is designed for inspecting different granulates up to a grain size of 6-8 mm at a temperature of up to 100°C in standing or slow-moving material columns.
Show more

The RAPID PRO-SENSE metal separator primarily is used for quality inspection (product purity) in the production and compounding of plastic granulate, where it typically is installed directly before the material is filled in bigbags, octabins, or silos. The metal separator also is used for quality inspection in the incoming goods department of plastic-processing plants (product purity, machine protection).

 

 

Show more

The split able tunnel detector DLS is used to analyse smalls and bulk materials on a conveyor belt or material chutes. Preferably used for high material. It detects all magnetic and non-magnetic metal contaminations (steel, stainless steel, aluminium) – even if enclosed in the product. On detection of metal, a signal device and a separation system can be activated or a signal can be send to process controlling.
Show more

The RAPID 4000-FS metal separator is used to inspect bulk goods under free-fall conditions. It detects all magnetic and non-magnetic metal contaminations (steel, stainless steel, aluminium) – even when enclosed in the product. Metal contaminations are rejected through the “Quick Flap” reject unit. The RAPID 4000-FS is used mainly in industries with low hygiene applications.
Show more

The single-face metal detector ELCON is used to inspect small and bulk materials on conveyor belts or material chutes, preferably of low material height. It detects all magnetic and non-magnetic metal contaminations (steel, stainless steel, aluminium) – even if enclosed in the product. On detection of metal, a signal device and a separation system can be activated or a signal can be send to process controlling.

Show more

ELS

The single-layer, single-face ELS detector is used for examining individually packed products and bulk materials on a conveyor belt or a material chute, preferably with a low material height. It detects all magnetic and non-magnetic metal contaminations (steel, stainless steel, aluminium) – even if enclosed in the product. On detection of metal, a signal device and a separation system can be activated or a signal can be sent to process controlling.

Show more

GF
The metal separator GF is used in vacuum and pressure pipelines to protect injection moulders and converting machines. It detects all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium, etc.) – even when they are enclosed in the product. Metal contaminants are ejected via the “Quick-Flap” separation unit.
Show more

The EXTRACTOR-J inline magnet was developed specifically for applications in the plastics industry. It is designed for inspecting different granulates up to a grain size of 8-10 mm at a temperature of up to 80° C in gravity fed lines or slow-moving material columns.
Show more

MAGBOX inline magnets are mainly installed in existing pipeline systems to remove fine and very fine ferrous metal contaminants from bulk materials.
Show more

The metal separator PROTECTOR is installed directly over the feeder of an injection moulder, an extruder or a blow moulder. It detects all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium, etc.) – even when they are enclosed in the product. Metal contaminants are ejected via the “Quick-Flap” separation unit.
Show more

The PROTECTOR PROFESSIONAL metal separator is installed directly above the material inlet of an injection-moulding machine, extruder, or blow-moulding machine. It detects all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium, …) – even if such contaminants are enclosed in the product. Metal contaminants are automatically and reliably separated by means of the reject unit ("Quick-Valve"). The special design of the PROTECTOR PROFESSIONAL guarantees highest scanning sensitivity for smallest metal particles even under high mechanical loads, which may result from high superstructural assemblies, for example when various conveying, dosing, mixing, or feeding units are used simultaneously. The design with integrated reinforcing frame ensures that the high-performance detection unit is in no way affected by vertical mechanical forces.
Show more

In the production of plastics, compounds, composites, etc. the PROTECTOR-MF metal separator ensures product quality. PROTECTOR-MF metal separators increase machine availability and productivity providing a fast return on investment.
Show more

The metal separator RAPID DUAL is used to inspect slowly moving bulk material such as foil flakes, wooden pellets, etc. as well as large streams in free-fall pipelines. It detects all magnetic and non-magnetic metal contamination (steel, stainless steel, aluminium) – even when enclosed in the product. Metal contaminations are rejected through the “Quick Flap” reject unit with dual separation flap.
Show more

The RAPID VARIO-FS metal separator is used to inspect bulk goods under free-fall conditions. It detects all magnetic and nonmagnetic metal contaminations (steel, stainless steel, aluminium) – even when enclosed in the product. Metal contaminations are rejected through the “Quick Flap” reject unit. The RAPID VARIO-FS is used mainly in industries with low hygiene applications.
Show more

SAFEMAG+PROTECTOR is the optimal combination for separating magnetic and non-magnetic metal contaminations in plastics processing. It is primarily employed to protect processing machinery. The SAFEMAG magnet separator removes all magnetic contaminations. The PROTECTOR reliably detects and separates all the remaining non-magnetic metals.
Show more

GLS
The metal detector GLS with closed detection head and rectangular opening is mainly used to analyse bulk material on conveyors or material chutes. It detects all magnetic and nonmagnetic metal contaminations (steel, stainless steel, aluminium) – even if enclosed in the product. On detection of metal, a signal device and a separation system can be activated or a signal can be send to process controlling. The closed design of the detector has the advantage to guarantee high metal sensibility within the detection head. Consequently, this metal detector is mainly used for highly precise detection tasks (e. g. in the food industry).
Show more

Contact

Have you found the right product for your application? Get in touch with us below. We also offer custom solutions for your project.

kontakt_en.png
Address

Sesotec Inc.
1234 Hardt Circle
Bartlett

Illinois 60103


tel: +1 224-208-1900
Fax: +1 224-208-1909
info@sesotec.us

Contact:

Doug Pedersen

(Food and Pharma)
Direct: +1 519-500-9471

Tracey Hartje
(Recycling)
Phone: +1 815-451-9764

Tony Rampino

(Plastics)
Direct: +1 847-217-4989