S+S offers systems featuring a swivel hopper and/or reject flap (quick flap system) that are ideal for removing metal contamination from bulk materials. Magnet separators are used to detect and separate ferrous metals.

1 2 >
GM
Permanently magnetic grid magnets can be supplied in circular, rectangular or square format and are therefore universally applicable. Ferrous particles are filtered out from bulk material as they pass through the magnetic grid.
Show more

The magnetic separation system MAGBOX AUTO-CLEAN is used in process lines for the efficient and automated cleaning of even the finest ferrous contaminations from gravity fed bulk materials.

Show more

Inline rod magnet system for freefall applications in the food and pharmaceutical industries and other areas with similarly stringent requirements. The robust and wear-resistant housing is made of rustproof stainless steel (1.4404). All surface are polished and welds are crack and crevice free.
Show more

Circular-aperture RZ tunnel metal detectors are used mainly in high-precision applications. The enclosed-aperture design ensures very high metal sensitivity throughout the tunnel area. RZ coil technology means that a metal-free zone is not required in the installation area.
Show more

For the separation of ferrous contaminants, plate magnets are installed in a continuous material flow above conveyor lines, in free fall, under chutes and slides, etc.

Show more

PRM
An inline chute magnet system for use with fibrous materials and materials that tend to bridge, which has proven effective with very high throughput rates and tubular pressure conveyor systems. Hinged stainless steel plates swing out for easy cleaning of the magnet blocks.
Show more

The RAPID 4000-FS metal separator is used to inspect bulk goods under free-fall conditions. It detects all magnetic and non-magnetic metal contaminations (steel, stainless steel, aluminium) – even when enclosed in the product. Metal contaminations are rejected through the “Quick Flap” reject unit. The RAPID 4000-FS is used mainly in industries with low hygiene applications.
Show more

RAPID 5000 metal separation systems for free fall applications have been specifically designed to meet exacting hygiene standards and are therefore particularly suitable for the food, chemical and pharmaceutical industries.
Show more

The RAPID 6000 metal separator for freefall applications removes magnetic and non-magnetic metal impurities via a swivel hopper. This method has proven highly effective especially for coarse-grained, flaky, light, fibrous, friable or moist bulk materials.
Show more

Metal separator used for the inspection of bulk materials in free-fall conveyor pipes starting from a nominal width of 200 mm. Metal contaminations are rejected by means of a swivel hopper. The reject outlet is of dust-proof design during normal operation.
Show more

1 2 >
S+S is a member of
VDMA
Choose the original
As a member of the VDMA (German Engineering Federation) we support the  "Choose the original" initiative for the protection of original technology against product and brand piracy!

Choose the original