Metal impurities can plug up hot nozzles, resulting in under-filling of molds. Metal detectors and separators prevent this defect and ensure perfect products.

1 2 >
Metal separator for freefall applications that is installed at the discharge of the cyclone or bag filling tube, for applications requiring higher scanning sensitivity.
Show more

The RAPID VARIO-FS is a metal separator with product effect compensation that is installed at the cyclone outlet for freefall applications. Separate detection and separation units make it readily adaptable to many different configurations and conditions.
Show more

Metal detector for installation in pipeline systems, e.g. for free-fall applications, pneumatic conveyor lines, material columns that are slowly moving down, or pump feed lines. The metal detector is used for the inspection of bulk materials, fibres, or liquid/pasty products.
Show more

GLS
Rectangular-aperture GLS tunnel metal detectors are well suited to high-precision applications. The enclosed-aperture design ensures very high metal sensitivity throughout the tunnel area.
Show more

MAGBOX inline magnets are mainly installed in existing pipeline systems to remove fine and very fine ferrous metal contaminants from bulk materials.
Show more

The magnetic separation system MAGBOX AUTO-CLEAN is used in process lines for the efficient and automated cleaning of even the finest ferrous contaminations from gravity fed bulk materials.

Show more

The metal separation unit PRESEP is designed for highly contaminated material; neodymium magnets first separate all metallic contaminants before the metal separator removes all non magnetic contamination.
Show more

Magnetic separator for Jacob pipelines; Inspects granulates of up to 10 mm.
Show more

GM
Permanently magnetic grid magnets can be supplied in circular, rectangular or square format and are therefore universally applicable. Ferrous particles are filtered out from bulk material as they pass through the magnetic grid.
Show more

GMT
Permanent-magnetic grid magnets of type GMT & GML predominantly are used in the plastics industry for the separation of coarse ferrous contaminants. Ferrous particles are filtered out of the bulk material while the rest of the material passes the magnet grid. It is recommended to regularly check the magnet to make sure that contaminants are not knocked off. The low purchase costs provide excellent benefit that often results in a considerably improved product quality and in a reduction of expensive repairs.
Show more

1 2 >
S+S is a member of
VDMA
Choose the original
As a member of the VDMA (German Engineering Federation) we support the  "Choose the original" initiative for the protection of original technology against product and brand piracy!

Choose the original