The ELS-P is a plate metal detector that is installed ahead of the carder feed and detects any magnetic or non-magnetic particles in the fibers. If metal is detected, the supply of material to the carder is stopped.Show more
For the separation of ferrous contaminants, plate magnets are installed in a continuous material flow above conveyor lines, in free fall, under chutes and slides, etc.
The PROTEX E range of single-face metal detectors is used to inspect sheet materials (1.0 - 4.0 m) and pinpoint any metal fragments. They provide outstanding detection results, even when the distance between product and sensor surface is quite large. The sensor surface is divided into 256-mm wide segments. Installation is easy and cost-effective, thanks to a plug-in shaft and pedestal bearing.Show more